Call1-440-647-4143      Email
 
 
  • Threads - Threads to conform to table III (from spec. SS-102)/socket screw prod. bureau. N.Y., N.Y.
  • Pitch diameter - The pitch dia. at the socket face is the diametral equivalent of one-half thread larger than the pitch dia. (e1) of a standard pipe thread tapered tapped hole (0.750 diametral taper per 12") this provides the basic point of thread interference to produce a high pressure sealed joint.
  • Material - Steel, High grade. Hardened by quenching in a suitable medium from the hardening temperature tempered to a through hardness of rockwell "c" 36-43. (5-A) unless otherwise requested by customer.
  • Identification grooves - Six equally spaced identification grooves (3 permitted on 1/16-27 due to space limitations) to be located equidistant between corners of hexagon socket and edge of chamfer. No particular alignment with Hexagon is required.
Unit of Measure

Taper per Foot

N/A 7/8 in

Thread Type

N/A Flush Type (PTF-7/8)

Size & Pitch

N/A 2"-11.5

D
Nominal Diameter, Ref.

N/A 2.360

J
Hex, Across Flats

N/A 1.000

T
Socket Depth, Min.

N/A 0.360

G Min.

N/A 0.102

L
Overall Length

N/A 0.656/0.641